Usl JSD-100 Manuel d'utilisateur télécharger pdf (Page 42)

INTEG Process Group, Inc.

JNIOR

A Network I/O Resource 42

Cinema.JNIOR Application Manual

8 Fire Alarm

The Cinema.JNIOR Application can handle a variety of fire alarm issues. The following

Fire Alarm features can be configured.

NOTE: The following Registry keys appear in various screen shots previously included

in this document.

Fire Alarm Input

This is the input that is assigned to the fire alarm signal. The default JNIOR settings will

work with an input that is normally low (off) and goes high (on) when the fire alarm is

tripped. The JNIOR can also be configured to work with a fire alarm that has a normally

high (on) signal that goes low (off) when the fire alarm is tripped. For the latter, the fire

alarm input must be set for ‘inversion’. This can be done via the main JNIOR web page

or a Telnet session. The registry key and value to set so that the input is configured for

inversion is ‘IO/Inputs/dinX/Inversion = true’ where you replace X with the appropriate

input number.

Registry Key Default Valid Values

AppData/Cinema/IO/FireAlarmInput 1 -1 or Any Input

Number 1- 8

Fire Alarm Release Input

This is the input that is assigned to the fire alarm release signal. Since the fire alarm

signal may not stay high (on) or low (off) for the entire duration of the fire alarm event

there needs to be a signal indicating ‘all clear’.

Registry Key Default Valid Values

AppData/Cinema/IO/FireAlarmReleaseInput 2 -1 or Any Input

Number 1- 8

Fire Alarm Active Text

This is the text that will be sent in the SNMP message on a fire alarm event.

Registry Key Default Valid Values

AppData/Cinema/FireAlarmActiveText Fire Alarm Active

Any Text

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Pas de commentaire

Usl JSD-100 Manuel d'utilisateur Page 42