Usl JSD-100 Manuel d'installation télécharger pdf (Page 40)

SX-2000 Installation Manual

11/8/2010

GDC Technology Ltd. Page 39 of 42

3. Enter the IP address of the USL DAX device (see Figure 45).

4. Click the [Save] button to save configured settings.

Figure 44 USL DAX automation device setup

Figure 45 Automation settings for USL DAX device

3.3.11 Automation setup for USL JSD devices

The SX-2000 server supports automation for USL JSD-80 and JSD-100 sound processor. Follow

the steps below to configure a USL JSD device in the server automation interface.

Click the [Add] button on the [Devices] tab and enter the name of the device. In this

case, it is “JSD”. Set the device type to “USL-JSD” (see Figure 46).

2. Click [OK] and set up the device parameters for the USL JSD device.

1 2 ... 35 36 37 38 39 40 41 42

Pas de commentaire

Usl JSD-100 Manuel d'installation Page 40